Print Profile(1)
Description
Membership
Commercial License Access, Exclusive Designs and More!
Update: I cut the lenses out from a $7 face shield from Amazon and super glued magnets to make the lenses snap into place.
Durable, flexible, comfortable, wearable, print-in-place, and easy to remove supports.
Inspired by Oakley's Over-The-Top shades. Printed in iron gray metallic PLA, 50% speed, and with a 0.6mm hotend (any will work). I had several people try it on and everybody was surprised by how comfortable it is!
NOTE: In order for this to print perfectly please refer to the print profile settings and recommendations. I also uploaded a photo with the support settings (minor changes).
Infil 15-20%, 3-4 walls, Tree Supports, Threshold angle set to 35 degrees, glue stick the build plate, print at 50% speed
🦇 Deadmoon Designs — Forged in darkness, shared with the world.
Follow for more original creations.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (23)