Printing Dreams

cover

Imagen de WhatsApp 2025-05-31 a las 10.09.20_87aeecb5.jpg

Imagen de WhatsApp 2025-05-31 a las 01.59.32_5b0876bb.jpg

IMG-20250530-WA0001[1].jpg

IMG-20250530-WA0001[1]_(1).jpg

caja seca sin rosca.png

caja con rosca izquierda.png

Imagen de WhatsApp 2025-11-19 a las 16.08.54_9277e286.jpg

Imagen de WhatsApp 2025-11-19 a las 16.14.10_52702666.jpg

plate_1.png

plate_2.png

plate_3.png

2025-05-31_fa5f7e4a2a815.jpg

impreso con: Boquilla de 0,4mm,  Altura de capa 0,2mm,  Filamento PLA

Printed with: 0.4mm nozzle, 0.2mm layer height, PLA filament

0.2mm layer, 2 walls, 8% infill

tapa con logo

otros

for non-screwable support

Imagen de WhatsApp 2025-05-31 a las 01.59.32_88fde7f6.jpg

Este perfil es para quienes tienen una caja seca no enroscable

This profile is for those who have a non-threaded dry box

Soporte no enroscable - 0.2mm layer, 2 walls, 8% infill

A peticion popular he ampliado el contenedor de silice con una rejilla estrecha para que no se salgan las bolitas

By popular demand, I have enlarged the silica container with a narrow grid so that the beads do not fall out

Lid with enlarged silicone container with logo

for screwable support

tapa sin logo

plate_4.png

plate_5.png

plate_6.png

tapa sin logo.png

caja roscada derecha.png

este perfil contiene 2 tapas, una lisa y otra con el logotipo de bambulab. tambien tiene 3 cajas, una para soportes con rosca a la derecha y otra a la izquierda y otra para soportes sin rosca.

This profile contains 2 caps, one plain and one with the Bambulab logo. It also has 3 boxes, one for right-hand threaded supports, one for left-hand threaded supports, and one for non-threaded supports.

Profile with everything

Este perfil es para quienes tienen un soporte enroscable y lo quieren tener en el lado derecho

This profile is for those who have a screw-on mount and want to have it on the right side

right-side screw-on mount - 0.2mm layer, 2 wall, 8% in

Este perfil es para quienes tienen un soporte enroscable y lo quieren tener en el lado izquierdo

This profile is for those who have a threaded mount and want to have it on the left side

Left-handed threaded mount - 0.2mm layer, 2 walls, 8% infill

Imagen de WhatsApp 2025-11-14 a las 21.53.01_1ab1c432.jpg

afterAndBefore.png

A peticion popular, he creado esta regilla con espacios mas ajustados para quienes usan las bolistas de silicio sin bolsitas

By popular demand, I have created this grid with tighter spaces for those who use silica beads without bags

Desiccant grid with reduced gaps

drybox_no_roscable_ajustado.png

A peticion popular, he añadido un perfil con el cilindro mas amplio para que entre mejor el soporte

By popular demand, I have added a profile with a wider cylinder for a better fit of the holder

Snug non-threaded holder

3d_troopers

20260501_191947-2.jpg

20260501_191959-2.jpg

X2D and P2S external spool holder has the PTFE coupler pointing he opposite direction. I split up the non-threaded holder profile to relocate the window and hygrometer cutouts. The hygrometer is a little low, but it still works and I haven&#39;t found any other models or profiles for the external spool holders on these printers.

Reversed PTFE direction and relocated openings for X2D & P2S

mdawson

20251109_123606.jpg

Additional cover that has more space for desiccant and a cap with smaller holes so the desiccant does not come out.

World of prints

1000017676.jpg

For those of us who dosent have a hygrometer and needs to close hygrometer hole :) this is an AMS versionthis model is 42.0mm slightly smaller than normal hygrometer for those tight fits, its 0.25mm smaller in diameter on the insert sleve  and 48mm totalif you need the 42.25mm version , or with or without support or single color here they are as well https://makerworld.com/en/models/2932022-hygrometer#profileId-3282394

42.0mm ams version no bridge support

Nevio Matern

A1 Spool enclosure V2

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Si te gusta el modelo con mis cambios, puedes derme un impulso. gracias</boostcontent></boostme>Revisión 01/04/2025A peticion popular. Se añade un perfil para es soporte no roscable con mas espacio para introducir el soporte&nbsp;Revisión19/11/2025Se añade un perfil con una tapadera con un contener de silice ampliado al 150% con una rejilla estrecha para que no se salgan las bolas de silice&nbsp;Revisión 17/11/2025Se añade una rejilla mas estrecha para que no se puedan salir las bolas de siliceRevision 21/10/2025Se añade una caja seca para colocarlo en la parte izquierda del posorte, Necesitas tener un soporte roscado&nbsp;Revisión 23/09/2025Se añade una placa mas para poder usarlo en soportes no enroscables.No dispongo de un soporte sin roca por lo que las modificaciones se han realizado en base a las medidas proporcionadas por otros usuarios.gracias a @fabiopessoa por las medidas. Remix Inicial:Modificaciones respecto al orignal:  - He añadido una ventana para poder ver el estado del filamento  - Se incluye un anillo que se coloca desde dentro una vez puesto el hidrómetro que hace que el este no se mueva, (autor es @MarksMakerSpace) - En la tapa de la caja he añadido un par de pestañas que facilitan su extracción- Tambien he apadido una segunda tapa con el logotipo de bambu lab Si imprimes con mi perfil, por favor deja un comentario sube una foto y valora el pefil para que pueda mejorar. Si decides imprimir este modelo, por favor dejame un comentario con tus impresiones

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you like the model with my changes, you can boost me. Thanks</boostcontent></boostme>Revision 01/04/2025By popular demand. A profile is added for the non-threaded holder with more space to insert the holder&nbsp;Revision 19/11/2025A profile is added with a lid featuring a silica container enlarged to 150% with a narrow grid to prevent the silica beads from falling out&nbsp;Revision 17/11/2025A narrower grid is added to prevent the silica beads from falling outRevision 21/10/2025A dry box is added to place it on the left side of the holder. You need to have a threaded holder&nbsp;Revision 23/09/2025One more plate is added to be able to use it on non-threaded holders.I do not have a non-threaded holder, so the modifications have been made based on the measurements provided by other users.Thanks to @fabiopessoa for the measurements. Initial remix:Modifications from the original:  - I have added a window to see the filament status  - An inner ring is included that is placed after the hygrometer is in place to prevent it from moving, (author is @MarksMakerSpace) - On the box lid, I have added a couple of tabs to facilitate its removal- I have also added a second lid with the Bambu Lab logo If you print with my profile, please leave a comment, upload a photo, and rate the profile so I can improve. If you decide to print this model, please leave me a comment with your impressions

Print Profile(11)

Description

Comment & Rating (99)

This remix is based on

License

Remixes (2)

Related Models

dry box with window for the A1