catwoman

Project: CATWOMAN.hfp
Print with 100% infill using a 0.08 mm layer height and a 0.16 mm base layer.

The model measures 179 x 179 mm.
You can print with higher layer heights, below the minimum depth of 0.72 mm.
The maximum depth is 2.5 mm and the actual depth is 2.3 mm.

Filaments used:
PolyLite black PLA (retraction distance: 0.3 mm)
PolyLite gray PLA (retraction distance: 1 mm)
PolyLite white PLA (retraction distance: 5 mm)
This print utilizes 3 unique filaments.

Swap instructions:
Begin with black.
At layer 13 (1.12 mm), switch to gray.
At layer 21 (1.76 mm), switch to white for the remainder.