Search models, users, collections, and posts
stich neon
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
3.3 h
1 plate
Open in Bambu Studio
Boost
79
113
3
9
78
33
Released
Description
Content has been automatically translated.
Boost Me (for free)
If you enjoy my models, a boost helps me continue creating
Project: stich.hfp
Print with 100% infill and a 0.08 mm layer height, using a 0.16 mm base layer.
The model measures 165.64 x 179 mm.
You may print with higher layer heights, below the minimum depth of 0.56 mm.
The maximum depth is 2.7 mm and the actual depth is 2.7 mm.
Filaments used:
PolyLite PLA Black: Extrusion distance: 0.3
Sunlu PLA+ Sky Blue: Extrusion distance: 4
IIID Max Xtreme PLA+ White: Extrusion distance: 2.8
This print utilizes 3 unique filaments.
Change instructions:
Begin with black.
At layer 12 (1.04 mm), switch to Sky Blue.
At layer 25 (2.08 mm), switch to Xtreme White for the remainder.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (3)