Matthew Ghost

cover

IMG_3852.jpg

plate_1.png

2025-06-04_981e6b46a15018.jpg

0.2mm layer, 2 walls, 15% infill

TrebolLab

PXL_20250606_104655431~2.jpg

PXL_20250606_085758827.jpg

For A1 mini - 0.2mm layer, 2 walls, 15% infill

Otomar

1000016652_(1).jpg

1000016652.jpg

1000016653.jpg

dual color_nice effect_0.2mm layer, 2 walls, 15% infill

plate_2.png

LeeBob

8B7B3937-7085-43CE-8067-692841E6FD8B.GIF

IMG_2012.jpeg

IMG_1999.jpeg

I maxed this out in size for Larger Storage in my Bathroom:<ul><li>The front is positioned to print on the base angle as shown in the picture, however I changed the orientation of it to be sideways for easier printing with less issues.</li><li>I removed the holes for mounting and replaced with more appropriate sized holes, as when scaled the originals were huge now.</li><li>Sealed the locking holes 98% to allow the locking grips to hold but not completely lock you out (bumping does not open it, it needs to be intentional, which serves the purpose)</li><li>The locking grips that are part of the base had to be cut down as they were too hard to release the front.  - The base model is completely unchanged- all edits were made in Bambu studio, with adding shapes or negative parts to the original file, when you look at the files in the slicer it should be pretty apparent what I did, make sure to go to object tab to edit, you can raise or lower the cones to make larger or smaller screw holes depending on your needs, The current settings worked perfectly for the drywall screws I am using, they had a slight grip agains the screw and I kept the idea of a tapered hole for easy mounting.  - The original Maker gets all the points for this, I highly recommend boosting them as this is an excellent design.</li></ul>

Max sized for A1 full printbed sized

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Tilt Box Bathroom Organizer is a minimalistic and practical wall-mounted storage solution 🧼 designed to keep your bathroom essentials like cotton swabs, tampons, or makeup pads organized and easily accessible.<ul><li>Mount it using adhesive tape or screws – the back includes a countersunk hole for a 4.5 mm screw 🔩, ensuring a clean and secure installation.</li><li>The part 02_Case requires supports. I recommend enabling tree supports, as they are very easy to remove after printing.</li></ul>

Tilt Box - Bathroom Organizer

ASIA

Print Profile(4)

Description

Comment & Rating (264)

License

Related Models