Three-jaw chuck
Print Profile(2)
Description
Three-Jaw Chuck Principle Model
Introduction: This is a model toy designed according to the principle of a three-jaw chuck, intended solely for familiarization with the principle and as a toy; accuracy is not high. It can grip regular cylindrical objects with a maximum diameter of 30mm. The model's movement is quite smooth during operation; however, if the jaws are fully extended, there will be a slight catch. It is best not to force it further to avoid damage.
Printing: Download the print profile and print directly. Supports need to be removed from the large gear, as shown:
Installation: Two print profiles are available: screw fastening and friction fastening. The installation method is the same for both. Friction fastening will be very difficult to disassemble later.
For installation instructions, please open this link: https://www.bilibili.com/video/BV19dTEzGEP3/?spm_id_from=333.1387.homepage.video_card.click&vd_source=b285605de38f7e33c63f38aa13accc2b
If this model has been helpful, please like or boost this project; your support is greatly appreciated!
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)