Jacob - LED Name Lamp
Print Profile(3)
Description
"JACOB" as a printable LED name lamp
Print settings: 0.2mm with 8% infill is sufficient
For the bodies, I would use "Seamless" support for the LED channels
The letters and covers can be scaled larger
Please do not scale down. Otherwise, the covers might not fit anymore. For smaller letters and covers, I recommend printing a test letter and cover respectively
The covers can also be printed mirrored on the X-axis. This way, the covers close flush at the front. The disadvantage, however, is that the covers are not quite as easy to remove. I recommend printing a mirrored cover as a test beforehand
All letters must be glued. Please make sure that the LED channels are flush with each other. A special adhesive for PLA/PETG is best suited for this
For LEDs, I like to use inexpensive 5m RGB LED strips from Amazon for 8-12€. These can be cut to length at the end. Higher-quality RGBIC also allows for individually controllable letters, depending on skill
I am available for questions
I am happy to create further individual LED names upon request and a small donation.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)