Romwba3D

cover

ghost_1.jpeg

ghost_5.jpeg

ghost_2.jpeg

ghost_4.jpeg

IMG_2638.jpeg

IMG_2640.jpeg

IMG_2639.jpeg

IMG_2641.jpeg

Highland Cow

plate_1.png

2025-06-06_2ffd0eab71925.jpeg

4 colour Design - single plate - A1/P1P/P1S/X1C - Can also be printed on A1 Mini and H2D

0.16mm layer, 2 walls, 8% infill

tyttis_mgnittis

PXL_20250816_160329134.jpg

This print profile uses 0.5 filament flushing. At the current line height and other settings, that is just about the lowest I could take it before bambu studio complained. If you increase the quality, you may want to check this setting to make sure there is the least amount of filament waste as possible. The original profile uses a ton. Here are the slicing values from before and after the change for flushing:&nbsp;Filament Number      |      Before      |      After               1                    |      119.92g    |     40.89g               2                    |       86.98g     |     24.27g               3                    |       27.52g     |       7.13g               4                    |       25.91g     |     12.93g&nbsp;As you can see, substantially less waste. The original profile in some colors, white in particular, had much more waste than what was actually on the model. This profile at least closes that gap.&nbsp;The quality of the print stays the same as before. No color bleeding into the model. I kept the purge tower for this reason. One could make the argument to remove the tower and then increase the flush by 0.01 or by 0.02 to compensate.

Substantially Less Waste, 0.16mm layer, 2 walls, 8% infill

plate_2.png

plate_3.png

plate_4.png

EntdeckerFuchs

IMG_2529.JPG

IMG_2527.jpeg

Einzelne Teile auf Plattenkein AMS notwendigweniger Abfallschnellere Druckzeit&nbsp;Die Druckteile sind so angeordnet wie sie hinterher geklebt werden. Wenn man darauf achtet, dann ist es leichter diese zuzuordnen und zu kleben.

Individual parts on platesno AMS neededless wastefaster print time&nbsp;The printed parts are arranged in the same way they will be glued. Paying attention to this makes them easier to sort and glue

0.16mm layer, 2 walls, 8% infill, no AMS, separate parts

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

A fun Fan Art Model of a Highland Cow or Highland Coo !! he is on a single plate designed with 4 colours for printing with one AMS&nbsp;I have uploaded 3mf Print profiles for the X1C/P1P/P1S/A1&nbsp;This model is part of My Patreon <a target="_blank" rel="noopener noreferrer ugc" href="https://www.patreon.com/romwba3d">https://www.patreon.com/romwba3d</a>&nbsp;I have lots of fun Models available on the patreon , i specialised in styalised characters and Cartoon / TV / Movie models / Ducks&nbsp;Please note the Multi Colour RAW STL Files are designed to be printed all at once by importing into your slicer as a Muli STL and not printed seperatly and glued togeather. If you print them that way they may not fit correctly&nbsp;You can view all the Available Models - now over 350 on https://www.romwba3d.com

Cute Highland Cow

ASIA

Print Profile(3)

Bill of Materials

Description

Comment & Rating (378)

License

Related Models