G923 Steering Wheel Knob

Steering Wheel Knob for G923

The axle is printed in place, has little to no play, is easy to assemble, and requires no extra hardware.

This mod is specifically made for the G923 steering wheel. It might not fit on other steering wheels.

The “head” of the knob is designed to be easily swapped out.

Installation:

• Free the axle after printing (it requires a lot of force - more on that below)
• Remove the blue metal piece from your wheel (this is necessary for extra grip and to prevent scratches on your wheel)
• Place both halves on the wheel
• Screw in the bottom screw first
• Lastly, press the two halves together and screw in the second screw

Freeing the Axle:

Place the axle on the edge of a table. Place a ruler or book on top and press it against the table. Then twist the axle with the “head” still attached until it rotates freely.