Clock

This model is a DIY clock.

For the multicolor version, I used wood-plastic filament to print the main body. If you use glow-in-the-dark filament for the numbers and markings, I recommend purchasing glow-in-the-dark clock hands for a more coordinated look.

For the monochrome version, I recommend using a light-colored filament, allowing you to paint the numbers and markings afterward for better contrast.

The clock has a diameter of 165mm, a mounting thickness of 2.5mm, and a central hole of 8mm. The model uses short clock hands; standard-length hands can be shortened as desired.

I purchased the clock movement, a Baibake 1044 movement, from Taobao—they are inexpensive; I bought four for 10 yuan.

*Due to the model's large surface area, ensure the build plate is thoroughly cleaned or coated with adhesive to prevent warping and spaghetti-like results.