Search models, users, collections, and posts
HueForge - Zach from Hotline Miami
IP Report
Print Profile(1)
0.08mm layer, 0.16mm first layer, 1 walls, 100% infill
Designer
2.3 h
1 plate
Open in Bambu Studio
Boost
9
6
0
0
11
4
Released
Description
I thought I would try to create a hueforge of Zach from hotline miami, I think it turned out pretty good.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Don't change the print size otherwise it will mess with the layers
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA BambuLab Basic BambuLab Green Transmission Distance: 8
PLA+ Sunlu Pure Yellow Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5
PLA+ Sunlu Pure Yellow Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to BambuLab Green
At layer #16 (1.36mm) swap to Pure Yellow
At layer #19 (1.6mm) swap to White
At layer #21 (1.76mm) swap to Pure Yellow for the rest.
License
This user content is licensed under a
Creative Commons Attribution
Comment & Rating (0)