Heat Expansion Insert - holds two tracks
Print Profile(2)
Description
This insert allows you to store two tracks in a single Heat, Pedal to the Metal expansion box, either Heavy Rain or Tunnel Vision, or a future expansion with the same box size. The four pieces of this insert can be printed all four on a single build plate. I had a 0.2mm nozzle installed when printing this, but it should just as easily print with a 0.4 or larger nozzle.
You can keep the weight low by reducing infill, 7% Gyroid seems to work just fine.
If you download the stl, be aware that you will have to print it four times!
I have printed this model myself (twice, I had to adjust a few measurements after the first print), and it fits perfectly in the box, and the tracks fit in the insert just fine too, without too much wiggle room.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)