Booknook Lord of the rings
Print Profile(3)
Description
Lord of the Rings bookends, the flames of the earth's depths rising the Balrog
Ideal for adorning your Tolkien collection in a library
The LED lamp comes from Amazon: https://amzn.eu/d/agWvA37
Hueforge Settings
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 99x218mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 1.1mm and the Actual Depth is 1.2mm
Filaments Used:
PLA BambuLab Basic White Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Orange Transmission Distance: 7
PLA BambuLab Red Transmission Distance: 4.5
PLA+ Esun Brown Transmission Distance: 1.5
This print uses 5 unique filaments
Swap Instructions:
Start with White
At layer #2 (0.24mm) swap to Yellow
At layer #6 (0.56mm) swap to Orange
At layer #11 (0.96mm) swap to Red
At layer #12 (1.04mm) swap to Brown for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (128)