Space 1999 - Eagle Stand - With LED's
Print Profile(1)
Description
Boost Me (for free)
Please give this a boost if you appreciate the design. It really helps make creating these designs worth while.
This is a stand for the wonderfully designed Space 1999 - Eagle model found here on makerworld.
https://makerworld.com/en/models/940341-space-1999-eagle?from=search#profileId-905954
I have seen stands similar but they either didn't quite fit the model or didn't print very well.
Plus my designing my own I have manage to incorporate some LED lights with the ability to turn them on and off with ease from a switch designed into the back of the stand.
If you are interested in adding the LED's I have linked the ones I used below.
Otherwise the model would work just fine without them or possibly work with just about any little fiery lights but you will need at least 20 of them to fill each hole in the model.
https://www.amazon.co.uk/dp/B01JMAXBSG?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Please note - do not glue the red strips on the top direct to the stand. Just glue the location pegs. The part is very thin and the glue can be seen through it. Thanks to @tontonseb01 for his feedback 👍🏼
License
Comment & Rating (29)