Avatar - Hueforge
Print Profile(1)
Description
My photos are indeed those of the printed model and not of the original image
-------------------------------------------------------------------------------------------------------------------------------------------------------
Commercial license and exclusive models on Ko-fi!
Thanks!
-------------------------------------------------------------------------------------------------------------------------------------------------------
Hueforge of Avatar poster
The photos shows the result in 200*143mm and a nozzle of 0.4
Boost Me (for free)
Thanks for your boost!
You can change the X and Y dimensions but do not change the Z dimensions
You must define the printing parameters indicated in the description below and change the filament on the indicated layers.
You can use filaments other than those indicated, but the result will differ.
You can use any black PLA
Hueforge description
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm
The Model is 143.43x200mm in size
You may print at higher layer heights below the Base Thickness of 0.68mm
The Max allowed Thickness is 2.44mm and the Actual Thickness is 2.36mm
Filaments Used:
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#00358e PLA BambuLab Basic Blue Transmission Distance: 4
#0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 5 unique filaments
Swap Instructions:
Start with BambuLab Basic Black
At layer #16 (0.8mm) swap to BambuLab Basic Blue
At layer #19 (0.92mm) swap to BambuLab Basic Cyan
At layer #28 (1.28mm) swap to BambuLab Basic Jade White
At layer #41 (1.8mm) swap to BambuLab Basic Cyan
At layer #45 (1.96mm) swap to BambuLab Basic Yellow for the rest.
-------------------------------------------------------------------------------------------------------------------------------------------------------
Don't forget your grandma's advice: Always have a clean plate, a dry and calibrate filament, and make an offering to the god of 3D printing from time to time.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)