AMS/External Filament Y Splitter
Print Profile(1)
Description
Requires 2 M3*12 screws.
3 PC4-01 quick-connect fittings, and two lengths of 4mm PTFE tubing (length customizable).
Another designer on this platform has created a very similar model, which I only discovered halfway through my own design process…The appearance is quite similar, but the dimensions, structure, and logo differ. Please choose according to your needs
20240112
The PTFE tubing couldn't pass through the quick-connect fitting, and the filament exit was prone to jamming, so a new tapered fitting has been added, installed inside the quick-connect fitting.
The screws for securing the retaining clips require slightly longer screws from your hardware kit to be fully tightened.
20250613 Update
Improved internal pipe shape, significantly enhancing filament flow.
First layer print changed to 0.3mm line width, allowing for a clearer and more complete print of the AMS logo.
Happy printing! Your support is appreciated if you find this helpful!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (24)