Print Profile(5)
Bill of Materials
Description
One-cent pieces are embedded in the center of the keychains. This size can be adjusted for other coins or even washers if you don't have magnetic coins. A pause is built into the print profile to allow for manual coin insertion.
12x3mm magnets were used for the key rack. This size can be adjusted for other magnets.
If the tolerances for your printer are not suitable and the keychains are too difficult to remove from the rack, slightly increase the scaling of the negative parts on the rack in X/Y.
After several insertions, the keychains should slide in and out more easily.
If you are interested in a print profile with a 0.2 nozzle for improved results, please let me know.
Boost Me (for free)
If you like this model, please consider giving me a boost. Thank you :)
For the figurines:
Bambu PLA Basic:
For the house:
Bambu PLA Basic:
Bambu PLA Matte:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (24)