Wall mount bracket for photo backdrop crossbar

I designed this photography backdrop holder to hold one or two backdrop cross-bars. I usually use white and black backdrop. Did not have the room for a full stand and I really wanted something with a small footprint.

It works with backdrop crossbars which have 16mm diameter hole (or larger) .

Usually these crossbars are telescopic, you can easily mount the brackets with the distance that you need for your crossbar.

Instructions:

1. Simply mark the needed crossbar hole spacing on the wall and extend them to 30cm vertical line (you can see the markings on my pictures)
2. Place the bracket on the wall and allign the designed notches with the markings, then mark the wholes for the screws.
3. Repeat the same with the second bracket and make sure it is rotated (they should be mirrored like in my picture), make sure they are horizontal.
4. Select the screws which fit the brackets and mount the brackets using the mounting techniques appropriate for your wall.