O3ga_3dprinting

cover

medidas.jpg

IMG_20250613_094855.jpg

IMG_20250613_094821.jpg

IMG_20250613_094815.jpg

IMG_20250613_095015.jpg

plate_1.png

2025-06-16_7595e107f1688.jpg

0.08mm layer, 3 walls, 25% infill

10 juegos completos, de gancho incompleto, para combinar con un tornillo tipo M3 de 40 mm con cabeza avellanada.

Ten complete, unfinished hook sets, designed to pair with a 40 mm countersunk M3 screw.

0.2mm layer, 2 walls, 40% infill

10 juegos completos, de gancho incompleto, para combinar con un tornillo tipo M3 de 40 mm con cabeza cilíndrica.

Ten complete, incomplete hook sets, designed to pair with a 40 mm cylindrical-head M3 screw.

1 juego completo, de gancho incompleto, para combinar con un tornillo tipo M3 de 40 mm con cabeza cilíndrica.

One complete set, of an incomplete hook, designed to pair with a 40mm cylindrical-head M3 screw.

1 juego completo, de gancho incompleto, para combinar con un tornillo tipo M3 de 40 mm con cabeza avellanada.

One complete set, of an incomplete hook, designed to pair with a 40 mm countersunk M3 screw.

Jp2004

20260331_205929.jpg

Captura de pantalla 2026-03-31 212630.png

Buenas, edite el archivo original para adaptarlo a la necesidad de mi mosquitera eliminando el rectángulo entre la rosca y la cabeza que sujeta la mosquitera&nbsp;0.2mm layer4 walls, 40% infill

Hello, I modified the original file to suit my mosquito net, by removing the rectangular section between the screw thread and the head that secures the net&nbsp;0.2mm layer4 walls40% infill

0.2mm layer, 4 walls, 40% infill, Sin rectangulo

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Esta pequeña pieza sirve para fijar las mosquiteras de diferentes modelos. Por favor, antes de imprimir el modelo, compruebe en las imagenes que las medidas corresponden con el suyo, hay ligeras variaciones de tamaño entre los fabricantes.es perfectamente compatible con la tuerca y la pequeña pieza giratoria original.Esta impresa en PETG para que la rosca resista lo máximo posible el desgaste que le causa la arandela. También hay variantes, en las que se sustituye la rosca plástica, por un tornillo de rosca métrica de 40 mm, que aumenta la resistencia.

This small part serves to secure window screens of various models.Please, before printing the model, verify in the images that the measurements correspond to yours; slight size variations exist between manufacturers.It is perfectly compatible with the original nut and small rotating piece.It is printed in PETG so that the thread resists wear from the washer as much as possible.Variants also exist, in which the plastic thread is replaced by a 40 mm metric screw, increasing its durability.

Print Profile(6)

Description

Comment & Rating (14)

License

Related Models

screen door latch

Print Profile(6)

Description

Comment & Rating (14)

License

Related Models