Honkai: Star Rail - Silver Wolf - Bookmark

Description

A bookmark themed after Silver Wolf from Honkai: Star Rail.

The artwork is from a high-quality fan art piece found in the official community.

Dimensions: Approximately 61*130mm

Thickness: Approximately 3mm

Bookmark lanyard hole diameter: 3mm

Printed with 100% infill, other settings use the default print preset with a layer height of 0.08mm.

(Compared to other bookmarks on the site, this bookmark has a slightly increased thickness, making it stronger and less prone to bending)

The bookmark uses the following four filaments; if you don't use these four filaments, the result may be slightly different.

Bambu Lab PLA basic Black

Bambu Lab PLA basic Dark Gray

Bambu Lab PLA basic Light Gray

Bambu Lab PLA basic White

The bookmark's printing parameters have been adjusted; users with an AMS can download and print directly.

Users without an AMS can refer to the color change instructions below and add color changes at the corresponding layer to print!

Color Change Instructions:
Starting with Black
At layer 10 (0.92mm), change to Dark Gray
At layer 17 (1.48mm), change to Light Gray

At layer 25 (2.12mm), change the remaining part to White.