Search models, users, collections, and posts
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
4.3 h
1 plate
Open in Bambu Studio
Boost
53
106
6
1
28
19
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
The Model is 112.48x200mm in size
You may print at higher layer heights below the Base Thickness of 0.6mm
The Max allowed Thickness is 2.36mm and the Actual Thickness is 2.36mm
Filaments Used:
#000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6
#949995 PLA Sunlu Silver Transmission Distance: 3.5
#00f52c PLA Sunlu Green Transmission Distance: 6
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal
At layer #8 (0.76mm) swap to Silver
At layer #11 (1mm) swap to Green
At layer #20 (1.72mm) swap to Jade White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Share Alike
Comment & Rating (6)