Identity V - The Ripper - Bookmark
Print Profile(1)
Description
A bookmark themed after The Ripper from Identity V.
Size: Approximately 73*130mm
Thickness: Approximately 3mm
Bookmark lanyard hole diameter: 3mm
100% infill print, other settings use the default print preset with a layer height of 0.08mm.
(Compared to other bookmarks on the site, this bookmark has a slightly increased thickness, making it more sturdy and less prone to bending)
The bookmark uses the following four filaments; if you do not use these four filaments, the results may vary.
Bambu Lab PLA basic Black
Bambu Lab PLA basic Dark Gray
Bambu Lab PLA basic Light Gray
Bambu Lab PLA basic White
The bookmark's print parameters have already been adjusted. Users with AMS can download and print directly.
Users without AMS can refer to the color change instructions below and add a pause to change colors at the corresponding layer!
Color change instructions:
Starting with black
At layer 8 (0.76mm), change to dark gray
At layer 13 (1.16mm), change to light gray
At layer 20 (1.72mm), change the remaining part to white.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)