Porsche 911 One-Meter Wall Art

This is a remix of Reticle's “Porsche 911 Wall Art” model. I sized it up to 1 meter in length and cut it to 9 pieces to fit on the A1 mini's build plate. 

I also rotated every piece so that the side facing you is the one that touches the build plate. This way, if you use the textured plate, you get a bit of a shine from the model. You can also use the 3D effect plates to get a carbon fiber finish, for example.

I made 2 print profiles for this model, one for the A1 mini print bed size and one for the A1, P1, X1 and H2D (so basically all the others).

The latter of the print profiles consists of 4 plates labeled 1 through 4 that you need to glue 1-2-3-4, so you have it easy.

The A1 mini model consists of 7 plates and 9 parts (3 of the parts are printed on one plate). After printing you will end up with more parts like the lines in “Front 3” or the part from the side vent in “Lower 1”. I suggest you lay all the pieces flat and assemble them like in the picture below before gluing anything. 

Drop a comment if you printed it or have ideas for future updates! I love hearing your feedback! 
Thanks for being part of the community 💙

🎉 Enjoying the model? Give it a boost!