Cartoon Finger Pointing Stick
Print Profile(2)
Description
Model Description
1. After printing, the smallest telescopic tube has a protrusion. Pull out this tube and insert the small protrusion into the corresponding hole, then rotate to lock it in place.
2. Assembly tolerances have been set; direct installation should provide a secure fit, but the use of adhesive is still recommended.
3. A snap-fit model is provided; its use is encouraged.
• Avoid forcefully ejecting the item. Due to the relatively weak interlayer adhesion of 3D-printed parts, forceful ejection may break the snap-fit. Normal use should not cause this issue.
• Before use, ensure that the corresponding telescopic tube is securely locked.
This model required considerable effort to create. If you have any dissatisfaction, please feel free to provide feedback. Kindly consider carefully before submitting a low rating, thank you~
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)