AMS Lite Hub Bracket Version 3
Print Profile(3)
Description
New version, this time it does not use any ventilation slots for attachment, so it does not affect the temperature. You must unscrew the two screws holding the hub, place the part, and screw them back in. Use the same screws that come with the printer
Update: The stock screws work, at least for the first time. If you need to replace them for any reason, they might be difficult to screw in, as it involves threading into plastic. The BT3 3-8 screws that come with the printer are suitable. However, be gentle, do not overtighten!
Print with supports in this orientation. I appreciate feedback, and if you find it useful, please boost
Enjoy!
Updated August 11, 2025: Modified for increased stability and easier printing
Description updated May 14, 2026: Some say the screws for the scraper work if the stock ones are a bit short (or if you've removed them a couple of times and the plastic has worn down a bit). Tighten carefully, and be extremely careful with the filament sensor's flex cable, as it breaks just by looking at it!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (60)