CLOUD FFVII - Magic the Gathering Commander
Print Profile(1)
Description
This is another in the same style of my series of deck boxes in the MTG Mana colours. Room for 100 double sleeved cards, commander slides in the front, back section for 10 tokens.
Make sure you have calibrated your filament profiles to get good results from the side embossing.
PLEASE TAKE NOTE HERE: The lid is best printed with a 0.2mm nozzle but can be done quite nicely on 0.4mm. Make sure YOU change it if thats what you want :)
The magnets are 8mm x 3mm - they are tight! If you think that they are too tight, you can add XY Hole compensation in your slicer to around 0.14
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (16)