Omni-Man
Print Profile(1)
Description
This is omni-man from invincible. this is based off a screenshot from the tv show.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.32mm
The Max allowed Thickness is 2.08mm and the Actual Thickness is 2mm
Filaments Used:
#000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6
#de4343 PLA BambuLab Matte Scarlet Red Transmission Distance: 2
#0078bf PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
#e2dedb PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal
At layer #10 (0.88mm) swap to Scarlet Red
At layer #14 (1.2mm) swap to Marine Blue
At layer #18 (1.52mm) swap to White for the rest.
Those are just the filaments i had on hand. use whatever you want.
To scale it, change the x and y dimensions, do not change the z dimension.
Boost Me (for free)
boost me if you like my prints
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (18)