3D Manga Panels

cover

Cartel recompensa luffy gear 5 (1).jpg

Cartel recompensa luffy gear 5 (2).jpg

Cartel recompensa luffy gear 5 (3).jpg

Cartel recompensa luffy gear 5 (4).jpg

Cartel recompensa luffy gear 5 (5).jpg

plate_1.png

2025-06-24_e60406e2dc5fd8.jpg

<ul><li>Generador de perímetros: Aracne</li><li>Altura de capa: 0,2 mm.</li><li>Bucles de perímetro: 1</li><li>Capas superiores: 1</li><li>Cajas inferiores: 1</li><li>Patrón de capa superior: Monotónico</li><li>Patrón de capa inferior: Monotónico</li><li>Densidad de relleno: 100%</li><li>Patrón de relleno: Rectilíneo</li><li>Patrón de relleno sólido interno: Monotónico</li><li>Plataforma de adhesión/: Ninguna</li><li>Primera capa: 50 mm/s</li><li>Relleno de primera capa: 105 mm/s</li><li>Perímetro externo: 200 mm/s</li><li>Perímetro interno: 300 mm/s</li><li>Relleno poco denso: 270 mm/s</li><li>Relleno sólido interno: 250 mm/s</li><li>Relleno sólido superior: 60 mm/s (este es importante)</li></ul>-----<ul><li>Perimeter generator: Arachne</li><li>Layer height: 0,2 mm</li><li>Perimeters loops: 1</li><li>Top layers: 1</li><li>Bottom layers: 1</li><li>Top layer pattern: Monotonic</li><li>Bottom layer pattern: Monotonic</li><li>Infill Density: 100%</li><li>Infill pattern: Rectilinear</li><li>Solid inner infill pattern: Monotonic</li><li>Platform Adhesion: None</li><li>First Layer: 50 mm/s</li><li>First layer infill: 105 mm/s</li><li>Outer perimeter: 200 mm/s</li><li>Inner perimeter: 300 mm/s</li><li>Low dense infill: 270 mm/s</li><li>Inner solid infill: 250 mm/s</li><li>Top solid infill: 60 mm/s (this one is key!)</li></ul>

<ul><li>Perimeter generator: Arachne</li><li>Layer height: 0.2 mm</li><li>Perimeter loops: 1</li><li>Top layers: 1</li><li>Bottom layers: 1</li><li>Top layer pattern: Monotonic</li><li>Bottom layer pattern: Monotonic</li><li>Infill density: 100%</li><li>Infill pattern: Rectilinear</li><li>Solid inner infill pattern: Monotonic</li><li>Platform adhesion: None</li><li>First layer: 50 mm/s</li><li>First layer infill: 105 mm/s</li><li>Outer perimeter: 200 mm/s</li><li>Inner perimeter: 300 mm/s</li><li>Low dense infill: 270 mm/s</li><li>Inner solid infill: 250 mm/s</li><li>Top solid infill: 60 mm/s (this one is key!)</li></ul>

0.2mm layer, 1 walls, 100% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you like this model, boost it for free! It helps me a lot and means a world :D Thank you so much!</boostcontent></boostme><h2>Love this design? 💖</h2>If you enjoy this aesthetic, please consider supporting my new project, <a target="_blank" rel="noopener noreferrer ugc" href="https://kamimarks.com/">KamiMarks</a>!&nbsp;While this design looks good here, if you want a printed one (that looks much better), you can find them at KamiMarks. &nbsp;And it&#39;s not just bookends! You&#39;ll also find bookmarks, book trackers, and more accessories for your manga, books, and shelves!<h2>&#34;Wanted” poster of Monkey D Luffy | Fan Art 👒</h2>Panel and a stand to place it vertically are included.<ul><li>Thickness of the panel: 3 millimeters.</li><li>Dimensions: 240 x 160 x 3 millimeters.</li><li>Weight: ±100 grams.</li></ul>Can be printed without AMS by adding the pause in the layers shown below and changing the filament, although it is much easier using the AMS.&nbsp;Can be printed with a 0.4 mm noozle. Actually, the file is optimized for 0,4 mm noozles.&nbsp;Three colors are needed for the figure: black, dark gray, and white.&nbsp;Double-sided tape or any type of adhesive suitable for walls can be used to stick the panel to the wall.&nbsp;Printed and verified using PLA Recyled from Smart Materials:<ul><li>Black</li><li>Dark gray</li><li>White</li></ul><h3>Can I sell this bookends? ⛔</h3>No, you cannot. <h3>Recommended print settings 🖨️</h3><ul><li>Perimeter generator: Arachne</li><li>Layer height: 0,2 mm</li><li>Perimeters loops: 1</li><li>Top layers: 1</li><li>Bottom layers: 1</li><li>Top layer pattern: Monotonic</li><li>Bottom layer pattern: Monotonic</li><li>Infill Density: 100%</li><li>Infill pattern: Rectilinear</li><li>Solid inner infill pattern: Monotonic</li><li>Platform Adhesion: None</li><li>First Layer: 50 mm/s</li><li>First layer infill: 105 mm/s</li><li>Outer perimeter: 200 mm/s</li><li>Inner perimeter: 300 mm/s</li><li>Low dense infill: 270 mm/s</li><li>Inner solid infill: 250 mm/s</li><li>Top solid infill: 60 mm/s (this one is key!)</li></ul><h3>Colours swaps 🎨</h3><ul><li>Start with black</li><li>At layer 11 (2,2 mm) swap to grey/silver.</li><li>At layer 13 (2,4 mm) swap to white for the rest.</li></ul>

Print Profile(1)

Description

Love this design? 💖

"Wanted” poster of Monkey D Luffy | Fan Art 👒

Can I sell this bookends? ⛔

Recommended print settings 🖨️

Colours swaps 🎨

Comment & Rating (36)

License

Related Models

Cartel "Wanted" de Luffy | One Piece Fan Art