Sennheiser EK 100 Mounting Bracket

Your Sennheiser EK 100 deserves better than swinging like a sad piñata every time you run out of cold shoes. Enter this dock: a clever little mount that attaches directly to any standard 1/4"-20 threaded hole on your cage, tripod, camera — you name it. Finally, a home for your wireless receiver that keeps it secure, accessible, and pro-looking.

Features:
✅ Upside-down mount — Designed so you never block the controls or the battery door. Swap batteries without removing the unit.
✅ Windows for the LCD & LEDs — See your signal strength, battery status, and channel at a glance.
✅ Integrated clips — Keep your antenna and XLR cable neatly tucked away, like you actually care about cable management.
✅ Custom fit for a D-shaft D-ring 1/4" screw —
Uses this style of screw (Amazon link) so you can mount it like a pro. The hole is intentionally undersized so you can cut your own threads into the plastic — just use pliers to thread the screw in from the back the first time (this is easier that trying from the front), the remove it and use the freshly cut threads to easily screw it in from the front, then you’re set. The screw stays captive like it would on a proper tripod plate, so you’ll never lose it.

Stop letting your wireless rig dangle like a wrecking ball. Print this dock and mount that EK 100 like you mean it.