Bird Nest Parrot Nest Bird Hammock

A cute birdhouse, providing a place for birds to rest

It can be printed directly from your phone, and installation is very easy, just snap the windows in and screw on the top bolts

The windows are made to fit snugly without glue, requiring a push to snap them in, and the bolts are designed with tolerances for a very smooth turn

The bottom pad is removable, and you can cut a towel or cloth from home into the shape shown in the picture, sewing both sides to thread through the rod

Print with PLA, using default settings, and add auto tree supports

Basic accessories are printed on 2 plates

V2: Added a mesh base with a feeder, the feeder trough has a buckle and is removable, so birds can eat grains inside the house

V3 modification: The feeder trough bottom is changed to a flat bottom, no supports

V4 modifications: Added a pure mesh base without a feeder, some friends reported that parakeets don't like red, so the birdhouse main body was changed to light brown, hope the birds like it XXXD

V5 update: Added buckles to the ends of the mesh plate to prevent the base from being detached by birds (see blue area in the image below)

V6 update: Added a small birdhouse print profile, suitable for smaller birds like finches, comparison between large and small sizes as follows

V8 update: Added logo, modified bolt print direction to increase strength

V9 update: Added modifier to bolts to increase strength

V10 update: Added two gear-shaped round head bolts, reducing the print time for bolts from two hours to one hour

If you need to house two large birds (Monk Parakeet, Sun Conure) at the same time, you can print the birdhouse PLUS version https://makerworld.com.cn/zh/models/1722248

All suggestions for modifications are welcome :D

And please share your prints～～～～～～～～～～～～～