Print Profile(1)
Description
This is my refined version of my own bathroom hanger for towels and bath robes. No visible mount.
Default with the text “Bath". The colours, fonts and the text can be adjusted in Bambu studio, limited to 4 letters.
Instruction:
Hooks: Make sure to mount all the hooks before wall mounting the hanger. Whack the corners (one corner at a time) of the hooks gently with a hammer to make them snap in place. Glue can be used but its not necessary (I did not use glue) as the fitment itself is flush enough to keep it in place.
Mounts: The mounts are printed with a prepared “distance” to assist you for making sure the CC will be correct. This can be snipped off once the mounts are fitted. (The CC is 181mm)
Push the main piece with the hanger onto the mounts and voila!
I printed mine in PETG, PLA should work just as fine. I used generic settings. No supports should be needed apart for mount part with the “distance helper”
Use the pictures for help.
Enjoy and happy printing, any eventual feedback is very much welcome!
Boost Me (for free)
Boosting is always appreciated, never expected. It works as a good motivation for me to keep sharing my files as I mostly print stuff for personal needs.
Thanks in advance!
Best regards
David
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (9)