USA war flag USA flag

Do not resize the thickness it will change the picture. You can make it smaller or larger just dont change the thickness. 

Project: Man next to flag.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 250x159.21mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #81312f PLA Paramount 3D Hannibal Red  Transmission Distance: 3
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #004c74 PLA Jessie Premium Blue Ice  Transmission Distance: 11
    #8c9099 PLA PolyLite Grey  Transmission Distance: 1
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Hannibal Red
    At layer #10 (0.86mm) swap to Blue Gray
    At layer #13 (1.12mm) swap to Blue Ice
    At layer #15 (1.28mm) swap to Grey
    At layer #20 (1.68mm) swap to White for the rest.