Terraria - First Night Diorama

Print this diorama based on the hit video game, Terraria! Featuring a basic home commonly built in the first night, and the Eye of Cthulhu! This model is printable without an AMS, as the provided print profile automatically pauses the print so you can change filament manually. This is designed to be small enough to fit on an A1 Mini; however, for better results, I recommend scaling the print up a bit!

Instructions:

This print is split into 5 plates. For those without an AMS unit, change the filament after each pause. I used Bambu Lab's PLA Matte to create this. Here are the colors I recommend using!

Base Plate: Charcoal

House, Dirt, and Tree Layer: Charcoal → Brown → Dark Green → Light Green 

Wood Wall Layer: Charcoal → Brown 

Sky And Eye of Cthulu Layer: Sky Blue → Charcoal → Green → Sky Blue → Red → White

Clouds: White

Tips

• For the House and Dirt layer, the Dark Green is optional if you would prefer to just use light green. However, the dark green definitely adds an extra pop to the look!
• For the Wood Wall Layer, I find using a darker brown than the one used for the house provides a more game-accurate look; however, this is completely optional.

At the end, connect everything to the base plate; it should snap together without glue, depending on your printer's tolerance.