NMS Alliance of Galactic Travellers Coaster

A coaster with the Alliance of Galactic Travellers logo from No Man's Sky. The image is public domain, available on the NMS Wiki.

The original image has two shades of orange, but to make this printable with just one AMS I substituted the existing red from the G for the darker orange in the top right quadrant.

The coaster is 100m in diameter, and 3mm thick.  It is oriented to print face down.  I used a Cryogrip Frostbite, which gives a nice, slightly shiny, dimpled texture, but just use whatever cranks your tractor.  I turned off ironing for the top layer, as the “top” is really the bottom, so won't ever be seen.  But feel free to enable ironing on top surfaces if you want.  It has 15 layers, with 5 top and bottom shells, leaving 5 layers in the middle with infill.  If you want a chonkier, heavier coaster you can increase the top and bottom shells so there is no infill, just solid plastic.

I used a mix of matte and normal PLA, but it'll print fine with whatever you've got knocking around.