Mini Hornet from Hollow Knight
Print Profile(1)
Bill of Materials
Description
A mini of Hornet from Hollow Knight
A simple mini of Hornet.
Get the whole gang
Pure Vessel
A smaller cute Hornet
Some users experienced difficulty in attaching the legs to the base, I have modified the base (making it deeper, flipped it over and turned on ironing; and added a bevel for easier insertion. Also, the head got a little extra support, but I advise you to reduce the speed by 50% if you are using a bedslinger, such as the A1 and a1Mini.
Any issues, please send a comment and I will see about it. Thanks a lot for choosing my model :)
You will need 6x2mm magnets to attach the head and superglue to glue it together. There is an included pin you can use if you dont have magnets.
Insert the body into the dress, there is only one way to make it fit. If it does not, light sanding may be needed to get rid of the elephant foot that is preventing it from fitting, small drop of glue. The legs are glued on to the provided base, again – a small drop of superglue is enough.
Join the sword and glue it. Once you have the figurine assembled, you will notice a small hole in the sword. This is where the left hand is glued to it. You are free to pose it different, however I shaped the cloak so it looks like the sword lifted it.
Boost Me (for free)
If you want to support me, you can join my Patreon page to support me and sell physical prints of my models with a clear conscience :D
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (373)