Power Adapter, сharger 6S-to-USB/Type-C 100W
Print Profile(1)
Description
Membership
💼 Commercial use: If you wish to manufacture this product commercially, I have added a commercial subscription. With an active subscription, you will gain the right to legally sell my models and at the same time support me as a developer. A commercial subscription can also be purchased simply for support
Boost Me (for free)
Your support is important
Hello, friends!
Maxim and I https://x.com/Maxwell255 https://www.facebook.com/maxim.kolnoochenko have developed this device so you can power your gadgets directly from drone batteries and measure the voltage on the batteries.
In difficult wartime conditions, when electricity is not always available, such an XT60 to USB-C/USB-A adapter will help you stay connected and charged in any situation
FOR NON-COMMERCIAL PRODUCTION ONLY !!!!
⚠️ Attention
FPV/LiPo batteries do not have built-in over-discharge protection (BMS).
After connecting, monitor the voltage level — too long use can over-discharge the battery and render it unusable.
✅ The current voltage is displayed on the screen (or external voltmeter) — do not allow it to drop below 3.2 V per cell
Minimum safe voltage for LiPo batteries:
| Configuration | Number of cells | Minimum per cell | Minimum total |
|---|---|---|---|
| 🔋 3S | 3 | 3.2 V | 9.6 V |
| 🔋 4S | 4 | 3.2 V | 12.8 V |
| 🔋 5S | 5 | 3.2 V | 16.0 V |
| 🔋 6S | 6 | 3.2 V | 19.2 V |
💡 Tip: for greater LiPo longevity, do not discharge below 3.3 V/cell.
You can use a LiPo-Alarm or a small voltmeter to monitor the charge level
📦 Bill of Materials (BOM) for XT60–USB Power Module
| № | Component | Purpose |
|---|---|---|
| 1 | QC4.0 / QC3.0 USB Type-C Quick Charge Adapter (6–35V Step-Down Buck-Boost)  | Main DC-DC module. Accepts 6–35V power from XT60 and outputs 5–20V USB-C/USB-A with support for QC 3.0/4.0, PD, etc. up to 100W |
| 2 | 0.28" 2-wire Digital Voltmeter (0–30V)  | Continuously displays LiPo battery voltage for monitoring remaining charge |
| 3 | AMASS XT60E-M Mountable XT60 Male Plug  | Main power input. Mounts into the housing, ensuring reliable contact with the battery |
Links to its older versions
24 W
65 W
Also, I am adding the model in STEP format so you can adapt it to your components
I know orcs will read this, remember we have time and a lot of inspiration
Glory to Ukraine
License
Comment & Rating (20)