RobotGeek

cover

IMG_9493.jpg

IMG_9492.jpg

IMG_9494.jpg

5.5mm diameter holes

plate_1.png

10mm diameter holes

plate_2.png

7mm diameter holes

plate_3.png

13mm diameter holes

plate_4.png

5inx5in w 7mm hole

plate_5.png

5.5mm holes with 5mm thick clips

plate_6.png

2025-07-02_f2fb6dfb714b4.jpg

Printed in PLA with the hole facing down on the plate.  The inside of the hole is coned at the bottom, so no supports are required.  I did add a raft to help adhesion to the plate, though I had some success without the raft when I was iterating test versions.  You can remove it if you dont think you need it.&nbsp;5/27/26 - fixed my mistake - had filled two plates with 5.5mm versions, omitting the 7mm.  Should be there now. Also added clips for 5&#34;x5&#34; post with 7mm hole… feel free to request other customization - once the parametric CAD is set up (which it is) it&#39;s about 5 min to add.

0.2mm layer, 3 walls, 15% infill

We live along a golf course and have a fence with 2&#34;x2&#34; square metal posts surrounding the yard.  I like to decorate with flags for US national holidays like July 4th, as shown in the photos.  These clips snap on the posts easily and snap off for storage.  I made versions with slightly different hole diameters for different sized flagpole sticks.

Fencepost flag holder for 2"x2" fence post

ASIA

Print Profile(1)

Description

Comment & Rating (13)

License

Related Models