Single Natural look, Rock Climbing hold
Print Profile(3)
Description
For all my climbing hold prints, I've primarily used PETG, which works best when it's dry at 0.16 layer and 2-5 fuzziness. ABS is a good alternative. I’ve also tried PLA, which performs well indoors as long as you’re not too heavy and avoid dynamic moves. Avoid overtightening the holds, and use a washer when necessary.
I design 3D-printed climbing holds in Bambu Studio. Using AI to transform real rock images with Image to 3d Model in MakerLab.
Please adjust the infill to 30–50% gyroid when 3D printing this hold set to minimize material for lighter climbers.
This 3D-printed climbing hold is provided without guarantees of print quality or structural integrity. Always inspect holds before use.
- Use a washer with the mounting hardware to ensure proper installation.
- Do not overtighten!
Crush it safely!
Boost Me (for free)
Thanks For the Boost!
Fasteners dimension
Wood screw # 8
Bolt Dimensions: 3/8-16 Allen Head Socket Cap Screws
Flat Head Socket Cap Bolt - Stainless Steel - 3/8", 16
Nominal Diameter: 9.525 mm (3/8 inch)
Washer Dimensions: SAE Flat Washers 3/8"
Inside Diameter: 10 mm
Outside Diameter: 21 mm
Thickness: 2 mm
Membership
Enjoying my work? For about the price of one coffee a week, you can fuel both my creativity and your climbing walls. Thanks for the support
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)