Mini garage (pre-plated, multiple sizes)

Every meticulously collected model car carries a story or a passion This mini garage was born to protect this treasured collection Its sturdy structure shields your beloved cars from dust and interference Dedicated parking spaces ensure an organized display The stackable design makes space no longer an issue pre-plated allowing each car to have its own custom-colored garage

The second generation garage has been updated click my homepage to find it

Friends who can do water transfers can add some waterslide decals themselves The effect will be even better

Model dimensions:

• The regular version measures 180x180x105 (mm) Each level can accommodate one **1/32** scale model car or one car model up to 170x80x88 (mm)
• The scaled-down version measures 130x130x77 (mm) Each level can accommodate one **1/43** scale model car or one car model up to 110x58x58 (mm)
• The super-scaled-down version measures 95x95x55 (mm) Each level can accommodate one **1/64** scale model car or one car model up to 72x41x40 (mm) (Compatible with most Tomica cars)

Solution for printing multi-color signs without multi-color printing:

• You can print the entire piece in white and then color it with acrylic markers

Solution for misaligned door frame and roller shutter parts:

• The reason is that burrs on the parts occupy the original space You can apply super glue to the expanded area and squeeze it firmly with both hands (The scaled-down version has been optimized For the regular version, simply proportionally scale down the "roller shutter" (not the door frame) single part to 99% of its original volume to improve it Those who believe in miracles by force can ignore this)

Solution for model size and vehicle size mismatch:

• There are many car models on the market with varying sizes so the model adaptation ratio is only for reference You still need to refer to the accommodating dimensions I noted above to determine
• If the vehicle is much larger than the reference size you can use the proportional scaling function in Bambu Studio on your computer to scale up all parts For example if your vehicle's scale is 1/43 but after actual measurement its length is more than ten millimeters larger than the scaled-down version's accommodating size then use the proportional scaling function to proportionally scale up all model parts by about 5% (the value is not fixed) Then use the measurement tool in the software to check if the size matches your vehicle's length (measure those two gray card slots) and then print
• When comparing model and vehicle sizes it is better for the model to be larger than the vehicle (vehicle should be small, model should be large) for the best visual effect

accessories:

• super glue
• One USB-powered COB LED strip (5mm wide) (length is customizable the scaled-down version needs to fit but a narrower one will be easier to install)

Notes:

1. Please read the instructions before installation
2. Please clean the build plate before printing and apply some print adhesive as needed to avoid printing failures
3. High temperatures affect filament flow Please perform filament flow calibration You can try printing some small parts first to check the situation and avoid wasting filament
4. Please assemble according to the model assembly manual Some parts require super glue for fixation as indicated in the manual
5. Some small parts have no fixed position and can be placed freely according to preference
6. The fit tolerance of the scaled-down parts varies some are tight and some are a bit loose You can use super glue to secure them as needed
7. The scaled-down tire rack's overhang effect is not very good You can adjust the overhang speed as needed (Perfectionists should print with caution)