C-shaped fixing clip. DN20-DN100
Print Profile(1)
Bill of Materials
- vite ⌀4 x 2: da DN20 a DN35
- vite ⌀5 x 2: da DN40 a DN65
- vite ⌀6 x 2: da DN70 a DN100
Description
Hello everyone!
I propose this model useful for fixing pipes of various diameters. It proved useful to me for mounting my osmosis system to the wall, but also for other pipes or circular conduits.
INTRODUCTION
The clip is convenient because it provides just the right resistance to prevent it from falling and to detach it without excessive force or marking the pipe. Furthermore, its thickness is not excessive to avoid being an eyesore. IMPORTANT: WALL MOUNTING IS DESIGNED WITH A SCREW AND WALL PLUG. When mounted, the screw will be hidden, meaning the head will remain inside the piece and will not obstruct the pipe.
TIP: FOR THE CLIP TO FUNCTION CORRECTLY, PRINT THE PIECE WITH A DIAMETER 10mm SMALLER!!
UPDATE ON 28/09/2025: NEW FILE WITH WALL LENGTH 30MM_FROM DN40 TO DN100. AVAILABLE ON MY PROFILE AND ACCESSIBLE VIA THE LINK BELOW:
clip bracket DN40 - DN100 base length 30mm by fedoom MakerWorld: Download Free 3D Models
MODEL
The print profile contains measurements from 20mm to 100mm in diameter. File already prepared to print 2 pieces. The table below lists all characteristics of each individual piece.
| ITEM | DN (mm) | ⌀ SCREW / ⌀ HEAD (mm) | THICKNESS (mm) | HEIGHT (mm) | PRINT TIME |
| 1 | 20 | 4 / 9 | 2 | 10 | 16 min |
| 2 | 25 | 4 / 9 | 2,5 | 12 | 18 min |
| 3 | 30 | 4 / 9 | 3 | 12 | 19 min |
| 4 | 35 | 4 / 9 | 3,5 | 15 | 22 min |
| 5 | 40 | 5 / 11 | 3,5 | 18 | 32 min |
| 6 | 45 | 5 / 11 | 4 | 20 | 40 min |
| 7 | 50 | 5 / 11 | 4 | 20 | 45 min |
| 8 | 55 | 5 / 11 | 4 | 22 | 48 min |
| 9 | 60 | 5 / 11 | 4 | 22 | 58 min |
| 10 | 65 | 5 / 11 | 4 | 25 | 1 hr 20 min |
| 11 | 70 | 6 / 13 | 4,5 | 30 | 1 hr 23 min |
| 12 | 75 | 6 / 13 | 4,5 | 30 | 1 hr 27 min |
| 13 | 80 | 6 / 13 | 4,5 | 30 | 1 hr 31 min |
| 14 | 85 | 6 / 13 | 5 | 30 | 1 hr 41 min |
| 15 | 90 | 6 / 13 | 5 | 30 | 1 hr 45 min |
| 16 | 95 | 6 / 13 | 5,5 | 30 | 1 hr 58 min |
| 17 | 100 | 6 / 13 | 5,5 | 30 | 2 hr 04 min |
NOTE: PRINT THE PIECE WITH A 10mm SMALLER DIAMETER TO ENSURE THE CLIP FUNCTIONS.
EXAMPLE: FOR A ⌀60 PIPE, PRINTING THE ⌀50 PIECE IS PREFERABLE
PRINTING
Printing is very simple. No supports are needed, not even for the hole.
Layer height is 0.2; infill is gyroid at 20% and 3 walls. Printable in PLA, PETG, ABS, etc. according to your needs.
The objects in the photos are made with Bambu Lab P1S using Overture PLA+ white filament. The piece in the photo is ⌀50 for a ⌀60 osmosis system pipe.
SALES
Selling without a license is strictly prohibited. If you are interested in selling, contact me privately to request a license. The model is quick to print and very lightweight, for a few euros you can purchase the license and obtain consent for commercialization.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (18)