Zånø

connettori PC4-M10

Tasselli da muro M6

Viti per tasselli da muro M6

cover

foto supporto bobine2.jpg

foto supporto bobine1.jpg

foto supporto bobine3.jpg

plate_1.png

plate_2.png

plate_3.png

foto supporto bobine5.jpg

2025-07-05_1583168d16ce3.jpg

Per la stampa consiglio layer da 0.20mm e 0.24mm e diversi infill in base  al pezzo.Il supporto a muro e il supporto per i tubi in ptfe hanno un infill del 25%, la barra per i tubi ha un infill del 25% e i 2 tubi per le bobine hanno un infill del 5%Per i supporti suggerisco un gap di 0.31mm

For printing, I recommend 0.20mm and 0.24mm layer heights and different infills depending on the partThe wall mount and the PTFE tube holder have 25% infill, the tube bar has 25% infill, and the 2 spool tubes have 5% infillFor supports, I suggest a 0.31mm gap

0.2mm e 0.24mm layer, 6 walls, 5%, 10%, 25% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Spero che il modello ti sia piaciuto, in caso puoi preme il tasto boost gratuitamente, grazie mille</boostcontent></boostme>Porta doppia bobina a muro, avendo messo il mio AMS Lite sull&#39;asse Z della mia A1 mini ho voluto disegnare un porta bobina che avesse integrati i connettori per i tubi in ptfePer questo modello non serve colla, però per montarlo serviranno 3 tasselli da muro M6  e 3 viti conpatibili con i tasselli.In oltre serviranno 2 connettori per tubi ptfe, ho disegnato questo modello per i connettori PC4-M10 visto che erano quelli che avevo

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>I hope you enjoyed the model; if so, you can boost it for free—thank you very much</boostcontent></boostme>Dual-wall spool holder: Having mounted my AMS Lite on the Z-axis of my A1 mini, I wanted to design a spool holder that integrated PTFE tube connectorsThis model requires no glue; however, assembling it will require three M6 wall anchors and three compatible screwsAdditionally, two PTFE tube connectors are needed; I designed this model for PC4-M10 connectors as those were the ones I had available

Print Profile(1)

Bill of Materials

Description

Comment & Rating (11)

License