Kwikpen 5th dose plunger, easy mode

With this model you can use the last dose (5th) of kwikpen of most brands. It's intended to use without break the pen in half, because this is difficult to do, only you need to remove the dial and insert the plunger.

Due abuse in the past with other models, no derivates/no commercial permitted.

If you don't have a printer contact me trought private message.

Print Settings

• PLA
• 190-200ºC (lower temp prefered) with the print fan full blast.
• 2 perimeters
• 0.15mm layer height

Kwikpen preparation

You need a pliers in order to remove the dial.

Grab the dial with the pliers and twist.

Remove all the parts of the interior.

Put the syringe in, you will notice that can be only inserted on two positions ;)