First Responder Door Jamb
Print Profile(1)
Bill of Materials
- Paracord or 550 Cord x 1: 10.5 inches in length
- 3/8" Heat Shrink Tubing x 1: 1" in length
Description
Inspired by the PLaperriere 9mm version. This is an excellent door jamb and when you are entering a building where the door locks but you want someone else behind you to enter with ease I suggest this door jamb!
I modified the hole for paracord to go in easier and adapted the infill/walls for a stronger jamb than the original. I also reduced the speed of the print significantly to help TPU print well. I have successfully printed 9 on a plate without stringing issues on the H2D. I have only printed in TPU-95HF but will try TPU-90 soon. You can add text on top if you like I would suggest utilizing PETG for better adherence for text.
To increase functionality I suggesting adding 10.5" of paracord. Be sure to burn the ends. Run it through the door jamb then add a 1" in length of 3/8" heat shrink tubbing. Then tie a knot and pull the heat shrink over the knot. It may be easier to use ½" heat shrink tubing but I like it as tight as possible over the knot.
Paracord I used: https://a.co/d/gxQIJKA
3/8" shrink tubing used: https://a.co/d/iNmWpJr
This remix is based on
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)