Twisted Spinning Top - Spins like forever

Intro

A nice twisted spinning top.

Why you’ll love it?

• Spins really like forever
• It es really easy to print

Recommended print settings

• Nozzle: 0.4
• Layers: 0.2
• Infill: 100%
• Perimeters: 2
• Thick bridges
• Filament: I recommend to use PLA or PETG (see below)
• Steel sheet: I recommend to use a satin or textured steel sheet.
• Print the body part facing the opening to the print bed

If the thread seems to be very tight, you may try one of these options:

• Enable to print the external perimeters first
• Make sure the filament is dry
• Use some graphite (this sure is the last option, but it may be an option for some users)

Extra: If you want to run the spinning top smooth, you may want to sand the tip a little bit with very fine sanding paper.

Filament recommendation

I used Prusament PLA Blend - It works great for this model. I love the vibrant colors! PETG is also a good choice. 

Copyright

You are welcome to print this model for personal use. Please respect the copyright. Unauthorized reuploads are monitored and reported.

Feedback & Support

If you enjoy this model, please consider hitting the LIKE button – it truly supports my work.

Have ideas, FEEDBACK or suggestions for improvements? I’d love to hear them – feel free to leave a comment.

Printed it already? That’s the best compliment! Please share a photo in the MAKES section – seeing your prints is incredibly motivating and helps others get inspired too.

Thank you for supporting independent designers and makers. ❤

Follow me for more like this...

FOLLOW ME for more practical prints, upgrades, and tools – new models coming soon.
Check out my profile for all uploads.

You may also like these models

This model is part of my huge collecion. Do not miss to check out what else could be useful to you.