NMS Galactic Hub Project Coaster

A coaster with the Galactic Hub Project logo from No Man's Sky. The image is public domain, available on the NMS Wiki.

The coaster is 100m in diameter, and 3mm thick.  It is oriented to print face down.  I used a Cryogrip Frostbite, which gives a nice, slightly shiny, dimpled texture, but just use whatever cranks your tractor.  I turned off ironing for the top layer, as the “top” is really the bottom, so won't ever be seen.  But feel free to enable ironing on top surfaces if you want.  It has 15 layers, with 5 top and bottom shells, leaving 5 layers in the middle with infill.  If you want a chonkier, heavier coaster you can increase the top and bottom shells so there is no infill, just solid plastic.

I used a mix of Elegoo, Deeplee and BL matte filaments.  The green/blue is Elegoo Teal Green Matte, which seems to be an exact match for the original color.