The Forge of Hollowyte

cover

GetAttachmentThumbnail.jpg

GetAttachmentThumbnail_(1).jpg

plate_1.png

2025-07-09_9212a306e13b48.jpg

Quality&nbsp;&nbsp;Layer Height<ul><li>0.16mm Layer Height</li><li>0.2mm Initial Layer Height</li></ul>Line Width<ul><li>0.5mm Default</li><li>0.5mm Initial Layer</li><li>0.5mm Outer Wall</li><li>0.5mm Inner Wall</li><li>0.5mm Top Surface</li><li>0.5mm Sparse Infill</li><li>0.5mm Internal Solid Infill</li><li>0.5mm Support</li></ul>Seam<ul><li>Seam Position set to Nearest</li><li>Smart Scarf Seam Application Enabled</li><li>155° Scarf Application Angle Threshold </li><li>Scarf Around Entire Wall Disabled</li><li>10 Scarf Steps</li><li>Scarf Joint for Inner Walls Enabled</li><li>Role-Based Wipe Speed Enabled</li></ul>Precision<ul><li>0.02mm Slice Gap Closing Radius</li><li>0.012mm Resolution</li><li>Arc Fitting Enabled</li><li>0mm X-Y Hole Compensation</li><li>0mm X-Y Contour Compensation</li><li>0.15mm Elephant Foot Compensation</li><li>Precise Z Height Disabled</li></ul>Ironing<ul><li>Top Surfaces Ironing Type</li><li>Rectilinear Ironing Pattern</li><li>30mm/s Ironing Speed</li><li>10% Ironing Flow</li><li>0.15mm Ironing Line Spacing</li><li>0.21mm Ironing Inset</li></ul>Wall Generator<ul><li>Arachne Wall Generator</li><li>10° Wall Transitioning Threshold Angle</li><li>25% Wall Transitioning Filter Margin</li><li>100% Wall Transition Length</li><li>1 Wall Distribution Count</li><li>85% Minimum Wall Width</li><li>25% Minimum Feature Size</li></ul>Advanced<ul><li>Inner/Outer Order of Walls</li><li>Print Infill First Disabled</li><li>Bridge Flow set to 1</li><li>Thick Bridges Disabled</li><li>Only One Wall on Top Surfaces Not Applied</li><li>Only One Wall on First Layer Disabled</li><li>Smooth Speed Discontinuity Area Enabled</li><li>Smooth Coefficient set to 150</li><li>Avoid Crossing Wall Enabled</li><li>0mm or 0% Avoid Crossing Wall - Max Detour Length</li></ul>&nbsp;Strength&nbsp;&nbsp;Walls<ul><li>2 Wall Loops</li><li>Detect Thin Wall Enabled</li></ul>Top/Bottom Shells<ul><li>Top Surface Patterns set to Concentric</li><li>6 Top Shell Layers</li><li>1mm Top Shell Thickness</li><li>Bottom Surface Pattern set to Monotonic</li><li>4 Bottom Shell Layers</li><li>0mm Bottom Shell Thickness</li><li>Internal Solid Infill Pattern set to Rectilinear</li></ul>Sparse Infill<ul><li>15% Sparse Infill Density</li><li>Sparse Infill Pattern set to Gyroid</li><li>400% Length of Sparse Infill Anchor</li><li>20mm or % Maximum Length of Sparse Infill Anchor </li></ul>Advanced<ul><li>15% Infill/Wall Overlap</li><li>45° Infill Direction</li><li>0° Bridge Direction</li><li>15mm² Minimum Sparse Infill Threshold</li><li>Infill Combination Disabled</li><li>Detect Narrow Internal Solid Infill Enabled</li><li>Ensure Vertical Shell Thickness Enabled</li></ul>&nbsp;Speed&nbsp;&nbsp;Initial Layer Speed<ul><li>50mm/s Initial Layer</li><li>105mm/s Initial Layer Infill</li></ul>Other Layers Speed<ul><li>60mm/s Outer Wall</li><li>150mm/s Inner Wall</li><li>50% Small Perimeters</li><li>0mm Small Perimeter Threshold</li><li>200mm/s Sparse Infill</li><li>200mm/s Internal Solid Infill</li><li>150mm/s Top Surface</li><li>Slow Down for Overhangs Enabled</li><li>Overhang Speed <ul><li>60mm/s 10%, 25%</li><li>30mm/s 25%, 50%</li><li>10mm/s 50%, 75%</li><li>10mm/s 75%, 100%</li></ul></li><li>50mm/s Over 100% Infill (Not Bridge)</li><li>50mm/s Bridge</li><li>250mm/s Gap Infill</li><li>150mm/s Support</li><li>80mm/s Support Interface</li></ul>Travel Speed<ul><li>500mm/s Travel</li></ul>Acceleration<ul><li>4,000mm/s² Normal Printing</li><li>500mm/s² Initial Layer</li><li>2,000mm/s² Outer Wall</li><li>0mm/s² Inner Wall</li><li>2,000mm/s² Top Surface</li><li>100% Sparse Infill</li></ul>&nbsp;Support&nbsp;&nbsp;Support<ul><li>Enable Support Enabled</li><li>Type set to Tree (Auto)</li><li>Style set to Default</li><li>25° Threshold Angle</li><li>On Build Plate Only Enabled</li><li>Support Critical Regions Only Disabled</li><li>Remove Small Overhangs Disabled</li></ul>Raft<ul><li>0 Raft Layers</li></ul>Filament for Supports<ul><li>Support/Raft Base set to Default</li><li>Support/Raft Interface set to Default</li></ul>Advanced<ul><li>90% Initial Layer Density</li><li>2mm Initial Layer Expansion</li><li>0 Support Wall Loops</li><li>0.16mm Top Z Distance</li><li>0.16mm Bottom Z Distance</li><li>Base Pattern set to Default</li><li>2.5mm Base Pattern Spacing</li><li>0° Pattern Angle</li><li>2 Top Interface Layers</li><li>2 Bottom Interface Layers</li><li>Interface Pattern set to Default</li><li>0.5mm Top Interface Spacing</li><li>0mm Normal Support Expansion</li><li>0.35mm Support/Object XY Distance</li><li>0.2mm Support/Object First Layer Gap</li><li>0mm Max Bridge Length</li><li>Independent Support Layer Height Enabled</li></ul>Tree Support<ul><li>5mm Branch Distance</li><li>2mm Branch Diameter</li><li>45° Branch Angle</li><li>5° Branch Diameter Angle</li></ul>&nbsp;Others&nbsp;&nbsp;Bed Adhesion<ul><li>0 Skirt Loops</li><li>1 Skirt Height</li><li>Brim Type set to Outer Brim Only</li><li>5mm Brim Width</li><li>0.1mm Brim-Object Gap</li></ul>Prime Tower<ul><li>Enable Enabled</li><li>35mm Width</li><li>45mm³ Prime Volume</li><li>3mm Brim Width</li></ul>Flush Options<ul><li>Flush Into Objects&#39; Infill Disabled</li><li>Flush Into Objects&#39; Support Enabled</li></ul>Special Mode<ul><li>Slicing Mode set to Regular</li><li>Print Sequence set to By Layer</li><li>Spiral Vase Disabled</li><li>Timelapse set to Traditional</li><li>Fuzzy Skin set to None</li></ul>Advanced<ul><li>0mm Interlocking Depth of a Segmented Region</li></ul>G-Code Output<ul><li>Reduce Infill Retraction Enabled</li></ul>

0.16mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Legendary Ziggurat-Style StrongholdStriking, symmetrical, and ready to print, this structure evokes the awe of ancient power and forgotten purpose. Its tiered design suggests a fortress, temple, monument, or command tower, depending on where your imagination takes it.Printed as a single, complete piece, it features clean geometry, bold lines, and dramatic presence — perfect for immediate display or creative integration into games, dioramas, or shelf collections.No assembly. No modifications needed. Just print and place.Ideal for:Fantasy &amp; sci-fi settingsTabletop terrain or propsDisplay modelsWorldbuilding inspiration&nbsp;As promised, the more complicated Ziggurat has arrived! This one took a while, mostly because the laptop that I operate on is utterly pathetic, partly because I had a two-week break. I hope that you, who are reading this, if you choose to print this, will thoroughly enjoy what this brings to whatever purpose you may have for this.

Print Profile(1)

Description

Comment & Rating (3)

License

Related Models

Ziggurat Fortress

Print Profile(1)

Description

Comment & Rating (3)

License

Related Models