Simple Air Purifier
Print Profile(3)
Description
- This is a simplified air purifier—top-exhaust version, paired with a 12cm fan (thickness 25mm—standard 12cm fan);
- Compatible with filter cartridges with an outer diameter of 200mm and an inner diameter of 144mm (Xiaomi air purifier filter);
- Printing requires no supports; all parts can be quickly printed, the base can be omitted.
- The top cover has a 0.4mm thick perforation; for speed controllers, simply pierce it.
During assembly, use fan screws to secure the fan to the fan base, tightening to ensure a seamless fit, connect the wires, and then snap the top cover directly downwards, securing it to the fan.
Note: Material shrinkage may affect dimensions; the gap between the fan base and the filter cartridge may change accordingly. Use masking tape or adhesive tape to wrap around once to compensate for the gap.
External Component 1: 12cm fan, simple reverse blade use
External Component 2: PWM speed controller or boost speed control wire—a USB 5V boost fan wire is recommended
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (16)