Nozzle cleaning brush double-headed V-shaped silicone brush A2L X2D P1S P2S H2D H2S A1 A1 mini H2C

The creation results are strictly protected by copyright laws and regulations. Any action without explicit permission is prohibited for commercial activities.

If you have commercial use needs, including but not limited to reproduction, distribution, public display, and sale, please contact the creator in a timely manner to handle authorization matters.

Thank you sincerely for respecting intellectual property rights and for your strong support of my creative work!

💐 Six elements for successful printing: 1. Clean the print plate with dish soap + hot water; 2. Dry damp filament; 3. Apply glue to the print plate if necessary; 4. Calibrate the printer regularly; 5. Continue reading the instructions on this page; 6. Wear gloves when removing the model.

【Bambu Lab Hotend Nozzle Double-Head V-shaped Cleaning Silicone Brush】Bambu Lab Exclusive

  💡Design Notes: 1. The V-shaped squeeze silicone head design greatly improves nozzle cleaning efficiency, supports all Bambu Lab printer models currently on sale; 2. Extended handle for easy cleaning and comfortable grip; 3. Toothed interlocking design securely holds the silicone head; 4. Only 10 grams of filament, beautiful and elegant.

  ⚙️Installation Guide (as shown): 1. Slide the two silicone heads inwards into place one by one; 2. Fine-tune back and forth, fine-tune up and down, and straighten the silicone bristles (Please do not stick double-sided tape on the back of the silicone brush, as it may cause the bristles to be misaligned, and those with OCD prefer tidiness)

  🖨️Filament recommendation: Bambu Lab official PLA series, compatible silicone wipe head specifications are 14mm x 5.6mm (Pinduoduo) 12.9 yuan for 24, one brush needs 2. (Or use the A1 mini's wipe silicone head, one can be cut into two for use)

  👋Instructions for use: 1. The nozzle temperature should be above 180 degrees Celsius when cleaning for better results (At room temperature, even a steel wool ball has no obvious effect); 2. Regularly brush the nozzle to remove dirt.

  ⏳Update Log/Plan: None yet

💐If you have spare silicone heads, you might want to check out these 2 designs of mine, which use the same silicone heads as this design.

P1, X1 Series Double-Head Nozzle Wiper with Clamp Arm Module (Click to jump)

P2S Nozzle Wipe Silicone Head High-Efficiency Nozzle Wipe Module Upgraded Base Solves P2S Filament Splatter (Click to jump)

  💐Wonderful comments from netizens:

💐If you need to clean the build plate quickly and efficiently, you might want to check out my design here:

Heated Bed Cleaning Wipe with Lid, Wall-Mountable (Click to jump)

💐If you need a scraper for the build plate, you might want to check out my design (click to jump):
Heated Bed Shovel Scraper Spatula Comfortable Grip Stands Upright Storage 2 Hex Keys

💐Summer is coming soon, if you want to quickly cool down the build plate to remove models, you might want to check out my design (click to jump):

Build Plate Rapid Cooling Base Rotary Timer Automatic Shut-off 10 seconds ~ 5 minutes PEI Plate Holder Quick Model Remover

👉Visit my homepage and 🔍 discover more amazing designs!

⬇️Xiaoshutong's Collections⬇️

【Most Popular Collections in China】（👈Click to jump to the international station collection）

【Most Popular Collections】（👈Click to jump to the China station collection）

【Must-have Accessories for Bambu Lab】（👈Click to jump to the China station collection）

【Toy Collection】（👈Click to jump to the China station collection）

【Home/Office/Study Essentials】（👈Click to jump to the China station collection）

⬇️Xiaoshutong's Recommended Designs for 2026⬇️ Please search on Xiaoshutong's homepage

2027 Auspicious Year of the Dragon 【Dynamic Red Envelope】⭐️

X2D, P2S High-Efficiency Silicone Wiper Module 【Solves messy filament】⭐️

Functional Phone and Tablet Stand 【Magnetic Triplet】⭐️