Pokémon Minccino Brush, keyboard brush, no supports
Print Profile(1)
Description
A Minccino keyboard brush, inspired by the meticulous Minccino that uses its tail as a broom to sweep away dust.
Dimensions: 26*15*25 cm
Important: To retain brush functionality, do not adjust the dimensions; otherwise, the brush will fail to print! Feel free to adjust for display purposes~
Boost Me (for free)
Thank you for your support, trainers! This motivates me to continue creating!
Assembly Instructions:
1、Do not use adhesive between the head and body, otherwise the Minccino will be unable to turn its head.
2、Insert the brush into the white tail, rotate to secure, and do not use adhesive.
3、Adhesive is required for all other parts.
4、Attach the pink portion to the ears first:
5、The slots on the tuft connector determine the installation orientation.
6、Do not omit the pink paw pads~
Important Notes Regarding the Brush!
1、The brush is optional and may be omitted.
2、PETG is recommended for printing the brush. Ensure flow calibration before printing.
3、Use a 0.4 nozzle with a 0.2 layer height. Do not alter any other print settings for the brush, do not adjust dimensions, do not remove the support blocker, and do not disable the brim; otherwise the brush will fail.
4、Do not use adhesive between the brush and the white tail. The tail handle is reusable.
5、After printing the brush, cut the bristles along the dashed lines in the image → remove the right-side supports → trim any stray bristles.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)