Palworld Palu keycap

Slicing Guidelines
1. Slicing layer height is 0.12mm, adjustments to the hole compensation are necessary after changing the layer height.
2. Print the “Base.stl” first to understand the shrinkage deviation caused by the printer and filament, adjust the hole compensation according to the tightness.
3. After printing, use low-grit sandpaper to lightly polish the surface for easy painting.
Painting Guidelines
1. A unit of paint is defined as [the extruded paint bottom diameter is equal to the small paint aluminum tube head diameter, the extruded paint height is 2/3 of the aluminum tube head diameter]. A unit of alcohol is defined as [spraying once with the alcohol sprayer].
2. Acrylic paints are used, purchase them on your own.
3. The mixing ratio for each color is as follows:
Brown: Burnt Sienna 1, Titanium White 2, Alcohol 2
Yellow: Lemon Yellow 1, Yellow Ochre 0.5, Alcohol 2
Black: Black 0.01 (Use a toothpick or similar to pick up)
4. Apply the paint with a brush. After painting, use hot air to dry.
5. You can use colored filament to print according to the color markings in the stl model folder, reducing the amount of painting work.